Manufacturer: KISSsoft AG

The interface between NX and KISSsoft is created by direct integration in the 3D CAD system. Use this to start all KISSsoft calculation modules directly from within NX. Cylindrical or bevel gears calculated in KISSsoft can then be generated directly in in NX as a 3D part with a real tooth form. Shafts calculated with KISSsoft can be generated as a 3D part comprising cylinder and cone elements directly in NX. You can create cylindrical gears with straight or helical teeth, which are outside or inside, worms, or straight-toothed bevel gears, as defined in DIN 3971, Figure 1, and shafts.
If you create a new part, the dialog opens first. In it, you can enter the name of the file in which the part should be generated. When you use Teamcenter, its dialog is displayed automatically so you can also generate or save the part in the Teamcenter environment. Furthermore, you have the option of adding toothing to existing shafts at a later point in time. In addition, gear manufacturing data in the 2D range can be automatically inserted as a table on the drawing, with the interface. The gear manufacturing data is attached to the relevant cutout (tooth space).
